TDK-Lambda GENH20-38/LN 19" bench PSU (adjustable voltage) 0 - 20 V DC 0 - 38 A 760 W 1 x programmable

CHF 1 999.65

VAT included

plus

piece

Delivery time: 8-11 days

in the inflow

Free return shipment until 31.01.2026

CHF 1 999.65

VAT included

plus

One article is not enough for you and you want to save money?

from 3 piece:	CHF 1 979.65	1,0% savings
from 5 piece:	CHF 1 959.65	2,0% savings
from 10 piece:	CHF 1 939.66	3,0% savings

Product description

Overview

760 WIn a44 mm case
0 - 20 V DC / 0 - 38 A
Synchronised
Input voltage range 85 - 265 V AC
Integrated RS-232/RS-485 interface
External analog control and monitoring
Type (misc.): Rack installation

Description

This 760 W lab power supply sets new standards. They are currently the most powerful 1 HU lab power supplies on the market. Another advantage is that you can stack one device on top of another which means that it needs no air slit either above or below and can actually get by on 1 HU.
Output voltages of up to 20 V and output currents of up to 38 A can be adjusted directly on the device or remotely via the built-in RS232/RS485 interface. All important functions can also be programmed via analogue inputs (control voltage 0 5V, 0-10V, control current 4-20 mA or via external resistor; relevant drivers are available for the digital control e.g., via LabView and LabWindows). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment.
A dual digital display shows the current values as well as various state information (amongst othersa.over Voltage Protection, Under Voltage Limit, over load mode, address adjustment ) , and a monitor output provides corresponding analogue voltages (0 - 5 V or 0 - 10 V) for external monitoring The device can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. This GEN/H model is half the structural shape of 19" racks.

Information

This product is a component power supply considered apparatus and is only to be installed by qualified persons within other equipment and must not be operated as a stand alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.