ABUS RM1100 RM1100 Heat detector

Overview

Detection of rise in temperature
Also suitable for connection to alarm systems.
Can be used in wet rooms

Description

The thermo-differential detector detects the fires that arise. It reacts to a maximum temperature and a rise in temperature. These indicators are detected reliably and reported to the alarm centre.
The thermo-differential detector is mounted at the ceiling in the middle of the room. The minimum distance to the side wall is 30cm. Since the thermo-differential detector – contrary to optical smoke detectors – does not detect any smoke, it is used mainly at places having a high load of dust and smoke (kitchens, smoking zones, garages). Only when the maximum temperature has exceeded 60 °C, or the temperature rises by more than 5 °C within 3 minutes, the detector triggers an alarm. By adjusting a jumper you can configure it as NO or as NC detector. As such, it fits with every wired alarm system. The thermo-differential detector is externally supplied power with 12V operating voltage and is EN54 certified.

Characteristics

Potential free Alarm-relay, breaking capacity 1 A/30 V/DC · Direct connection to each alarm control centre due to NO/NC.

Delivery content

• Thermo-Difference-Sensor
• Operating instructions (German)

Keywords

00000002151588, 04043158001303, 4043158001303, ABUS, RM1100