Description
Extremely inexpensive ISP programmer for ATMEL processors that can be programmed via the simple SPI interface. Remarkable is the own onboard processor with specially developed firmware, which allows very fast programming cycles. The secret is the dynamic use of the memory available on the programmer, which already fills up while still being programmed. Although the ISP-Programmer is a USB2.0 device, a simple USB1.1 interface on the PC is sufficient. Two DIL switches even allow a target power supply. This can be set to either 5V or 3.3V as well as switched on and off. This little helper for professionals, hobbyists and ambitious amateurs comes in a USB stick. Two built-in status LEDs indicate the current status of the programmer.
Functions: FLASH write and read, EEPROM write and read, Fusebits write and read, Lockbits write and read, Chip erase, OSCCAL register read.
Protocol: STK500v2, AVRISPV2. Software support: AVR-Studio 4, AVR-Studio 5 +, ATMEL-Studio 6, AVRDUDEand Bascom with the setting Options->Programmer = STK500 and AVR Studio installed. LEDs: USB LED: Lights up when USB is connected to PC, flashes when USB is active, target LED: Off when idle, flashes when target is accessed. Installation: Windows own driver. Integration by simple inf file from XP to WIN7 (32 and 64bit version). Support of the following microcontrollers: Atmel Classic, AT90S1200, AT90S2313, AT90S2333, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, Atmel ATTiny, ATtiny12, ATtiny13, ATtiny15, ATtiny2313, ATtiny24, ATtiny25, ATtiny26, ATtiny44, ATtiny45, ATtiny84, ATtiny85, Attiny86, ATtiny261, ATtiny461, ATtiny861, Atmel ATMega, Atmega88, ATmega103, ATmega128, ATmega1280, ATmega1281, ATmega16, ATmega161, ATmega162, ATmega163, ATmega164, ATmega168, ATmega169, ATmega2560, ATmega2561, ATmega32, ATmega324, ATmega325, ATmega3250, ATmega329x, ATmega48, ATmega64, ATmega640, ATmega644, ATmega645, ATmega6450, ATmega649x, ATmega8, ATmega8515, ATmega8535, Other Atmel Controllers: AT90CAN128, AT90PWM2, AT90PWM2B, AT90PWM3, AT90PWM3B, AT90USB162, AT90USB646, AT90USB647, AT90USB1286, AT90USB1287 all other ATMEGA processors that support the SPI programming interface.
Special feature:
Very fast programming cycle due to onboard processor and sophisticated firmware
Power supply of target 3.3V maximum 120mA, 5V 150-500mA depending on PC
no power supply required from target
