Equipped with a C 6 A module 180° RJ45 single module
45 ° cable access from the top, plug-in direction inclined 45° downward
Identification of wire assignment T568A and T568B directly on the loading piece
Network socket in the form of a circuit breaker. The socket insert is fully shielded and approved for CAT 6A. The box is mounted on standard DIN rails like an automatic circuit breaker. The width of 1 HP allows the installation of up to 12 modules in standard electrical distribution boards.
If installed as a device of protection class I, equipotential bonding is performed via an integrated equipotential bonding plate directly via the top-hat rail, which is connected to the building equipotential bonding via appropriate contact terminals.
The module is protected against direct contact by a cover. This means that protection class II remains in place when installed in insulated distribution boxes. The equipotential bonding spring must be removed for this purpose.
Connection unit for mounting on TH35 DIN EN 60715 in electrical distribution panels for home and industrial installation
GHMT Cat 6A re-embedded PVP certified.
Cat 6A component testing according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified
Compliance with the Class EA to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1:2011-09
Tested: Components up to 600 MHz, link up to 800 MHz
For 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT suitable
This enables an easy to mount connection of data lines AWG 24/1 - 22/1 (single-wired) and AWG 26/7 to 22/7 (multi-wired) to IDC terminals.
The overall width of 1 TE allows the installation of up to 12 REGplus in standard electrical distributor
Integrated dust protective cover (also available in color)
Network socket empty, please order module separately.
4250184136545, Metz Connect, 130B117003-E, BTR Netcom