Overview
Especially beginner-friendly
Stable flying
Auto-start function
Especially beginner-friendly
Stable flying
Auto-start function
"Simple" helicopters fly – this statement is particularly true for this flybarless model. With a rotor diameter of 320mm, the AFX180 single rotor is controlled by a 3D / 6G gyro and also has an automatic "hold height" mode (ATT. Hold). On top of that, this great beginner helicopter has an auto-start function installed, which takes off the model at the push of a button and lets it float independantly at a safe height. The pilot can thus concentrate relaxed on the essential control function – and does not need to worry about the gas and the tail any more. While the 6G system is properly balanced at the back, even the functions Nick (forward/backward) and Roll (right/left) have to be controlled. In 6G mode, the maximum servo deflection is also limited, whereby the system acts like a coaxial helicopter. When the joystick on the transmitter is in the center position, the model automatically stabilizes again around the neutral axis. For faster flights or in light wind, a dual rate function is available, which enables more servo travel. This makes the model more agile and more agile. All in all made of robust material and equipped with a large LiPo battery 2S 7.4V, 700mAh, long flight times of up to 15 minutes are possible. Quickly recharged within 70-90 minutes via USB cable, can be lifted again with the AFX180 single-rotor helicopter and the height air is enjoyed to the fullest.
Especially beginner-friendly
Stable flying
Auto-start function
Hold Height mode (ATT. Hold)
3D / 6G gyro for very stable flight position control
Dual rate function.
Long flight times (approx. 12-15min)
Short charging time with USB cable (approx. 70-90min)
Large rechargeable battery (LiPo 2S 7.4V, 700mAh 20C)
Robust material
Flybarless system
Batteries not included.
Amewi, 25314, AFX180 Single-Rotor