Amewi AMXFlight F8F Rare Bear RC model aircraft for beginners RtR 383 mm

CHF 99.00
VAT included
plus
Delivery time: 3-4 days
in stock
Free return shipment until 31.01.2026
Amewi AMXFlight F8F Rare Bear RC model aircraft for beginners RtR 383 mm
CHF 99.00
VAT included
plus
One article is not enough for you and you want to save money?
from 3 piece: CHF 98.01 1,0% savings
from 5 piece: CHF 97.02 2,0% savings
from 10 piece: CHF 96.03 3,0% savings

Product description

Overview

Receiver board with 5V output for S-Bus receiver and 3V output for DSM receiverElegant paint in Reno Racer design6G and 3D mode can be switched on the transmitter for beginners and advanced users

Description

The Grumman F8F Bearcat is a piston-driven, single-seater US aircraft in all-metal design from the 1940er. Thanks to the enormous top speed, the well-known Rare Bear – a modification of the F8F-2 – enjoys a racing aircraft at 850.24 km/h, which holds the record for piston-driven aircraft on a 3-km course at a limited flying height.The Rare Bear Amewi Edition is a scale replica of the well-known Reno Racers with the original paint of the racing aircraft and combines perfect flight characteristics (6G for beginners, 3D for advanced users) with the latest technology. The model is controlled via all axes (cross, height, side, motor) and is self-stabilizing (gyro) in 6G mode. This stabilization prevents the aircraft from overtaking and allows only a limited angle, so that looping, rolling or inverted flight is not possible in this setting. However, if you switch to 3D mode using the high-quality 2.4 GHz transmitter, it is also suitable for dynamic aerobatics. All described standard figures are then possible without any problem. If something goes wrong in the air, the P-40 can be switched back to the 6G mode with just a push of a button and immediately resumes a stable flight attitude (rescue function). In addition to these features, the model is equipped with a receiver board that allows operation with e.g. Futaba or other 5V S-Bus receivers as well as DSM receivers with a 3V output. Thus, the model does not depend on the remote control included in the delivery, but can also be used with an existing transmitter.

Characteristics

Receiver board with 5V output for S-Bus receiver and 3V output for DSM receiverElegant paint in Reno Racer design6G and 3D mode can be switched on the transmitter for beginners and advanced usersModel comes as RTF set including model, battery, transmitter and charging cableChassis for plugging in for ground starts includedLarge rechargeable battery included for long flight time (approx. 10min, LiPo 3.7V 400mAh)Long range thanks to modern 2.4 GHz system (approx. 150m)

Information

Batteries not included.

Delivery content

  • ModelTransmitterAccumulatorUSB charging plugAccessories for mountingUser manual.

Keywords

04260677956376, Amewi, 24113, AMXFlight F8F Rare Bear

Product specifications

Downloads

Reviews

Accessories / similar products

{{#if results}}
{{/if}}