Threaded hole on the device
Configuration via the software
easy to use
Directly reacting, smooth-moving impeller
Different measurement units can be selected
Evaluation on the PC (graphic display)
Alarm when limit value is exceeded
Wind gauge for different units (m/s, knots, km/h) / Data logger function / Measured value storage for up to 60,000 values / USB interface / Software for evaluation / configurable via PC software / Threaded hole for mounting the vane-wheel-emometer PCE-ADL 11 is a data logger for wind speeds. The configuration on the wind meter is done via the software included in the delivery. There are many settings options here. The wind gauge measures various parameters. This includes m/sec, km/h, knots, mph and ft/min In addition to the measurement parameters, the wind gauge software can be used to set the measurement intervals. The data logger function offers space for 60,000 measured values. Once the measurement series has been completed, the data can be read from the wind gauge on the computer via the software. The measurement results are displayed either graphically as a curve or in table form. The impeller installed on the wind gauge already responds to low flow speeds. The wind gauge can be attached by means of a mounting device. There is a threaded hole at the bottom of the wind gauge so that the device can be fixed to the mounting fixture.
04250348718099, PCE Instruments, PCE-ADL 11, mass air flow meter, maf
