Connects roller shutter armor and roller shutter shaftSuitable for Maxi shutter system with Ø 60 mmComplicates the improper pushing of the roller shutterCan be used for manual or electrically operated shuttersEasy hanging in square holes of the roller shutter shaft, without screws
The roller shutter suspension connects the roller shutter tank with the roller shutter shaft and at the same time makes it difficult to push the roller shutter up from the outside. The suspension is designed for the Maxi roller shutter system and is therefore suitable for a roller shutter shaft with a diameter of 60 mm. It is not necessary to drill screws or for installation. The roller shutter suspension is simply inserted into the square hole of the roller shutter shaft and pushed onto the strip of the top roller shutter profile. A distance of about 50 cm between the individual suspensions should be maintained. Three roller shutter suspensions are included in the delivery, they are suitable for both manual and electric shutters.
Schellenberg, 19401
