Overview
For watering of 90°-surfacesRange of 2.75 m and total area of 7 m²Easy installation on 13 mm wiring ducts5 spray nozzles 90°
For watering of 90°-surfacesRange of 2.75 m and total area of 7 m²Easy installation on 13 mm wiring ducts5 spray nozzles 90°
The 90° spray nozzle from GARDENA is ideal for watering the entire area around 90° in beetches and along the edges. The spray nozzle comes with a fine spray mist with a range of 2.75 m, which irrigates a total area of 7 m². Installation to the 13 mm pipe is simple and works either with the help of the mounting tool or by using the T-fitting for spray nozzles. In a few simple steps, the spray nozzle is best placed on the corner of the bed and is immediately ready to use. The extension tube for spray nozzles available separately (Part No. 13326-20) increases the position of the Micro-Drip-System component. By increasing the amount, the irrigation on higher-grown plants takes place from above down. Combined with the shut-off valve (Art.-No. 13207-20) it is possible to continuously regulate the water flow and block individual strands of the wiring pipe. This ensures optimal and water-saving irrigation. Thanks to its intuitive design, the spray pattern can be seen directly from the spray head. All GARDENA spray nozzles are thus clearly different. The quality product is manufactured in Germany.
Includes five spray nozzles for the irrigation of 90° areas, with a range of 2.75 m and a total area of 7 m²Easy installation on 13-mm wiring ducts using either the mounting tool (order no. 13313-20) or in connection with a T-piece for spray nozzles (Art.-No. 13206-20Extension tube for spray nozzles (Part No. 13326-20) as a practical accessory for the watering of higher plants by increasing the spray nozzle and shut-off valve (article no. 13207-20) for the continuous regulation of the watering as well as blocking of individual strands of the 13-mm pipeSpray can be clearly visible due to the intuitive designMade in Germany: Quality from Germany.
GARDENA, 13320-20