Description
Multifunction timer relay with 10 functions, 1 changeover contact floating 10A/250V AC, 230V LED lamps up to 400W, light bulbs 2000W*, with DX technology. Bidirectional. Standby loss of only 0.4 watt. DIN rail mounting device. Connection to the Eltako RS485 bus. Cross-wiring bus and power supply with jumper. Radio-window-door contacts (FTK) can be programmed with function NO or NC with open window. If a direction button is taught in, a function (e.g. "OK") with the upper button (START) can be activated TI) and can be stopped with the lower key (STOP). Simply connect the N conductor to terminal (N) and L to K (L). This results in an additional standby loss of only 0.1 watts. In case of failure of the supply voltage both contacts switch off. Contact 1 closes if the supply voltage is repetitive. Times can be set between 0.5 seconds and 10 hours. The upper and middle rotary switches are used to program and then set the time. The LED under the upper rotary switch accompanies the programming process according to operating instructions and indicates control commands during operation by a short blinking.