Overview
Monitoring of temperature and an external sensor
Memory for 40,000 records
MAX/MIN/AVG function, dew point, HI/LO alarm
USB interface with automatic PDF output
Windows software for configuration optional
Monitoring of temperature and an external sensor
Memory for 40,000 records
MAX/MIN/AVG function, dew point, HI/LO alarm
USB interface with automatic PDF output
Windows software for configuration optional
The LOG40 enables you to monitor and record the temperature accurately, whether during transportation of sensitive products, in cold stores, server rooms or for prescribed test protocols. This also allows you to control the temperature in living rooms over long periods of time.
The logger can record up to 40,000 records. The data recorded can be automatically output to your PC as a PDF file via a USB port. A measurement interval of 15 minutes is pre-programmed. Optionally, you can download a configuration software. Then the storage intervals can be set from 1 second to 24 hours.
In the event that certain limit values are exceeded or fallen short of, you will be warned by an alarm. An integrated motion detector detects and records vibrations, for example during a change of location, or when windows or doors are opened and closed.
A status and alarm LED is located below the display. The device features a high and low value, as well as a AVG function and a time marker. The logger is water-proof according to IP 65 and conforms to the EU-standard 12830.
The device is made completely in Germany. An ISO certificate is included in the delivery.
Optional sensors can also be connected: 30.3537 (temperature), 30.3538 (temperature and humidity), 30.3539 (temperature, humidity and air pressure)
For monitoring the temperature
With external connector for additional sensor (available separately)
Accuracy depends on the measurement range from ±0.5°C (-10...+60°C) otherwise ±1°C.
Status and alarm LED with signal tone (buzzer)
Memory for 40,000 records
MAX/MIN/AVG function, dew point, time marker
Can be used without software (15-minute measurement interval pre-programmed)
Automatic output as a PDF file
Optional software download for configuration
Adjustable storage interval (1 second to 24 hours)
Alarm when thresholds are exceeded or are not reached
Motion sensor documents vibrations, for example changing locations or opening of windows or doors
IP 65 water-proof
USB interface
According to EN 12830
With 6 bits. ISO certificate (measurement point 23°C)
Optional sensors: 30.3537 (temperature), 30.3538 (temperature and humidity), 30.3539 (temperature, humidity and air pressure)
Made in Germany.
TFA Dostmann, 31.1065.02, Datenlogger für Temperatur und externen Sensor LOG40, logger, data logger, measurement data logger