Absima CR1.8 Chassis Brushed 1:8 RC model car Electric Crawler 4WD RtR 2,4 GHz

Overview

Programmable 80 A Hobbywing speed controller
2-speed manual transmission
Locking differentials front & rear (independant of each other)
Lighting front/rear portal axles
25 kg steering servo with metal drive

Description

The most successful crawler chassis CR3.4 (Sherpa / Khamba) grows to CR1.8 !
With THE YUCATAN now true size is shown, because here comes a high-end "Ready-to-Run" Crawler in the scale 1:8. BUT YUCATAN also means that tried and tested is preserved and thus all the extraordinary technical highlights from the small CR3.4 brothers Sherpa and Khamba can be found again in the CR1.8. Through the 1:8 chassis even more extreme maneuvers are now possible and through the size of the body details could be emphasized even better, which give the vehicle a beautiful driving picture.

Characteristics

80 A speed controller by Hobbywing fully programmable
Powerful brushed motor of size 775
Maximum speed of over 30 km/h in 3S LiPo mode
5 mm CNC-machined aluminum frame
Heavy-duty aluminum 4-handlebar suspension system
Oil-filled aluminum shock absorbers with 5 mm piston rods
Shock springs in medium strength (SOFT & HARD are available as an option)
Stabilizer set included
Portal axes
Hydraulic steering shock absorber design
25 kg steering servo with aluminum servo arm
3 pieces 0.9 kg mini-servos (waterproof) for the 2-speed manual transmission and The differential locks/unlock buttons are already installed
2-speed manual transmission with standard gear ratio 1/37.1 (low-speed) to 1/15.1 (high-speed)
Lock and unlock the front and rear differentials independantly of each other, all electronically via the remote control and 2 built-in mini-servos
Aluminum motor bracket
Adjustable slipper clutch
The battery compartment has a dimension of approx. (L/W/H) 160 x 48 x 25mm and is thus designed for 2S or flat 3S LiPo batteries
The 6-channel radio system with 2.4 GHz gives you total control over your vehicle - whether light unit, 2-speed transmission, differential locks or setting the maximum speed
Lighting unit with front lights, rear lights, indicator lights (when steering is moving), position lights, hazard lights (front and rear), brake light, light strip on the roof
2.2" beadlock wheels with aluminum rings and 12-bolt design
Super-soft tires with realistic side wall flex for maximum traction on everyone Rocks
12 mm aluminum standard wheel trailer suitable for all common crawler rims (observe portal axles!)
Rock lids and molded inner fenders protect the chassis from dirt and Damage
1.2 mm PC "Flip-Top" body with magnet and screw holder
Complete interior including driver figure
Many attachment parts like towing hook (front and rear), rear view mirror, snorkel, full spare wheel, roof carrier, Tank fil

Information

No toys. Recommended for ages 14 years and over.

Delivery content

• 1 x Absima CR1.8 YUCATAN RTR
• 1 x 6-channel 2.4 GHz remote control system
• Stabilizer set front/rear
• 1 x wrench and 1 x hexagonal key
• Sticker sheet
• OPERATING INSTRUCTIONS (DE/EN/FR).

Requirements

Drive battery NiMH or LiPo + Charger for drive battery + 4 x AA-Mignon cells for the remote control + Optional program box for setting the speed controller parameters.

Keywords

04250650947026, Absima, 13001, CR1.8 Chassis