Overview
Conforms to calibration law
4G+ Modem
PLC ISO 15118 AND EEBUS
Conforms to calibration law
4G+ Modem
PLC ISO 15118 AND EEBUS
Walther Wallbox smartEVO duo connect+ with integrated 4G-modems (MicroSIM) for connecting to the back-end and roaming platforms Diverser providers (e.g. IPD connect).
Charging according to mode 3 according to IEC 61851
2x charging socket type 2 (mode 3)
Charging power per charging point up to 22 kW
3 status LEDs on the side panel to display the current status of the charging point
Authentication via side-mounted RFID panel
Visible energy meter (MID certified) for each charging point Display of consumption data in accordance with calibration and display of the public key as QR code and plain text
Powerline communication (PLC) according to ISO 15118 enables plug & charge and bi-directional communication with the vehicle.
Connection to energy management systems via Modbus TCP or EEBUS
Connectivity to IPD control and IPD manager as well as to the SMA communication protocol (SEMP)
Integrated web server
Update firmware version as well as control/ maintenance via remote access.
Ethernet interface incl. AMJ-module for connecting to permanently installed data cables
Smart Grid capability with OCPP 1.6 (JSON)
Integrated 4G modems (MicroSIM) for connecting to back-end and roaming platforms Diverser providers (e.g. IPD connect).
Local Dynamic Load Management (DLM) incl. Imposition load detection (precise phase control) for efficient use of available charging capacity with up to 250 charging points
Each charging point:
Permanent PE monitoring
6mA DC- residual current monitoring and FI type A
Protective-adhesive monitoring (welding detection)
Integrated 2-stage temperature monitoring.
Robust, weatherproof case
Galvanized powder-coated steel casing in iron mica gray (DB703)
Lockable door in elegant design
max. Power supply connection on NYY-J 2x5x10mm²
Direct connection to ground fault circuit interrupter
Caution!
High-voltage tankless water heaters:
Supplying this tankless water heater requires a 3-phase AC outlet.
Installing and connecting high-voltage tankless water heaters requires prior approval of your utility provider. More over, HV tankless water heaters must be installed by the utility provider, or a qualified and certified subcontractor only.
Walther Werke, 98603214E, smartEVO duo connect+, emobility, e mobility, charger