| from 3 piece: | 56,14 € | 1,0% savings |
| from 5 piece: | 55,57 € | 2,0% savings |
| from 10 piece: | 55,00 € | 3,0% savings |
Midi-Tower PC casing with excellent airflow
Six pre-installed Kolink Umbra ARGB 120-mm and 140-mm fans
Extensive hardware support with ATX motherboards and 330 mm GPUs
Front and side part made of tempered glass, side part can be folded up with magnetic lock
Integrated cable routing for clean builds
The stylish Observatory HF Glass ARGB Midi Tower
Enhance your gaming aesthetics with the Kolink Observatory HF Glass ARGB PC case. This Midi Tower has six Kolink Umbra ARGB fans and offers plenty of space for your high-end hardware. Colourful and functional! And thanks to built-in ventilation and dust filter, this PC case has a natural airflow that keeps your hardware components cool.
The Kolink Observatory HF Glass ARGB PC housing is made from a combination of high quality materials. The chassis is made of 0.5 mm SPCC steel, while the trim is made of either glass or flat metal. There are two observatory HF models, both available in black or white. This is the glass edition with an elegant glass front, surrounded by a white trim, which provides a classic aesthetic.
Moreover, the Kolink Observatory HF Glass ARGB sets colored accents with six ARGB fans pre-installed in the casing. These fans can be controlled via the reset button.
Extensive hardware support
The Kolink Observatory HF Glass ARGB PC case has been intelligently designed to provide broad support for a wide range of gaming hardware. This casing can accommodate Mini-ITX, Micro-ATX and ATX mainboards and has seven extension slots on the back side for supporting PCIe cards. There is 330 mm clearance for GPUs, which makes this housing compatible with a large selection of currently available graphic cards.
Furthermore, there is a special PSU-cover, under which ATX power supplies with a length of up to 180 mm can be accommodated. There is also a drive cage for 2.5-inch or 3.5-inch drives. There are also four drive slots on the rear of the mainboard tray. Two of them can be used for either 2.5-inch or 3.5-inch drives, while the other two are designed exclusively for 2.5-inch SSD drives.
Cooling the elite class
The Kolink Observatory HF Glass ARGB Midi-Tower is equipped with six pre-installed Kolink Umbra ARGB fans, in 120 mm as well as in 140 mm design. Three 140 mm fans are mounted on the front, while two 120 mm fans are mounted on the top and one single fan on the rear. The illumination of the fans can be controlled either via the integrated RGB button on the I/O-panel or via one of the 140-mm fans, which is connected to the mainboard via a 5V-3-pin adapter.
Alternatively, up to three 120 mm fans can be installed at the front side, while two 140 mm fans can be attached at the cover. In addition, there are slots for two 120-mm fans at the power supply cover, which enable a direct cooling of the PSU-chamber and the graphics card.
If you prefer a water cooling, you can use radiators on the front or rear side of the device instead of the fans. There is a 360-series heat exchanger on the front side, and a 120-series model fits on the rear side. Finally there is still space for 160 mm high CPU-coolers.
For clean builds
In order to offer you a variety of connection possibilities, the Kolink Observatory HF Glass ARGB Midi-Tower has an extensive I/O-panel. It offers a USB 3.0, two USB 2.0 and an HD audio connection as well as a fan control and a Reset button.
Inside the Kolink Observatory HF Glass ARGB has an integrated cable guide. The rear panel of the motherboard has intelligently positioned penetrations that make routing your cables a child's play and make your gaming PC look tidy.
Kolink, OBSERVATORY HF GW, Observatory HF Glass, Desktop, PC, Computer
