PCE Instruments Detector PCE-160 CB PCE-160 CB

Overview

Sensitivity adjustment
Headphone jack
Different signal tones
Cable tracking in walls and cable ducts
For mobile use
Semi-rigid sensor for optimum positioning

Description

Detector CableTracker PCE-160 CB detector for locating cables / with different signal tones / continuity test / semi-rigid probe tip for optimum positioning / headphone connection / battery operated for mobile use / sensitivity control The positioning device PCE-160 CB is a direct cable locating device for cables that are difficult to access. The detector is used, for example, in the automotive sector. When using the detector, the transmitter is connected to the cables to be detected using the alligator clips. The transmitter of the detector generates a pulse signal after it is switched on. The receiver of the detector can then be used to detect the pulse signals, for example on a wiring harness. This allows quick location of the line. In addition to the cable location, there is also the continuity check for the detector. Only the transmitter is required for this function. You can also connect these directly to your cables. The through function directly indicates to the operator whether a closed circuit is present.

Delivery content

• 1 x positioning device PCE-160 CB consisting of
• 1 x transmitter
• 1 x receiver
• 2 x 9 V block batteries
• 1 x carrying case
• 1x user manual

Keywords

04250348720221, PCE Instruments, PCE-160 CB, cable detector, cable locator