PCE Instruments PCE-180 CBN Cable locator

Overview

Pocket-sized tester
Cable tracking in walls or cable ducts
For detecting line interruptions
With different signal tones
RJ-11 plug and alligator clips
Headphone jack
Non-conductive probe tip
Sensitivity adjustment

Description

Cable Finder CableTracker PCE-180 CBN finds connections and interruptions to cables in cable channels/stages and walls in building cabling often poses the problem, which cable leads to which connection and where the cable runs along, because you want to drill holes on a wall, for example. The cable finder/CableTracker PCE-180CBN consists of a signal transmitter and a highly sensitive receiver. The signaling device is connected to the end socket or a cable wire and sends a coded signal into the cable. Due to the radiation, the receiver tracks the cable or the wire and you are able to check the routing of the voltage-free lines or any interruption without damaging the insulation or breaking up walls and opening cable channels. The volume/sensitivity can be set on the cable tester/receiver. All conventional lines, network cables and coaxial cables can be checked. The tone generator has alligator clips and a network plug for connection. The tester/receiver can also be used with other tone generators for cable tracking.

Delivery content

• 1 x cable finder PCE-180 CBN
• Incl. signal generator/sensor and connection cable
• 2 x battery
• 1 x belt pouch
• 1x user manual

Keywords

04250348713957, PCE Instruments, PCE-180 CBN, cable finder, cable finder tool