| from 3 piece: | 183,36 € | 1,0% savings |
| from 5 piece: | 181,51 € | 2,0% savings |
| from 10 piece: | 179,66 € | 3,0% savings |
HT38
LED display and buzzer with variable tone
Assignment of fuses
Assignment and tracking of a line
Auto switch-off
HT10
Voltages of 3 - 1000 V AC/DC
Button for load switching (RCD trip 30 mA)
Large LCD display with illumination
Bar graph display starting from 12 V AC/DC
Measuring point lighting with white LED
19 mm contact gap for one-handed testing
The voltage tester is built and tested according to EN 61243-3 / VDE 0682 and ensures reliable working. It conforms to the protection class IP64 (dust and spray-water protected), and the spray-on soft rubber handle makes Ideal suitable for the toughest jobs in manual or industrial environments. The risk of injury is excluded while carrying the device in clothes pockets or in the tool bag because the measuring tip protection is firmly connected. The independent ELV indicator LED indicates if voltage is greater than 50V AC / 120 V, even if there is no battery power or a failure of the main circuit. The HT38 is a newly developed professional fuse finder. It supports by its easy handling the location and assignment of fuses to the live circuits. The safety finder HT38 consists of a transmitter with integrated shock-proof plug and a receiver with battery supply. The receiver's integrated optical and acoustic display will make it much easier for you to locate electric circuits in distributors and junction boxes. The HT38 corresponds to IEC / EN 61010-1 as well as category CAT III 250V.
AC and DC voltage up to 1000 V AC/DC
Bar graph with 12 / 24 / 50 / 120 / 230 / 400 / 690 / 1000 V.
Voltage measurement with low internal impedance
Single pole Phase testing
Polarity indicator
Rotating field direction determination
Resistance measurement 0Ω ÷ 1999Ω
Optical and acoustic continuity test 0Ω ÷ 400kΩ
Fixed impedance 350kΩ (3.5 mA at 1000 V)
Measured value memory (Data HOLD)
Auto switch-off
Button for load switching (RCD tripping 30mA)
Large LCD display with illumination
Measuring point lighting with white LED
19 mm contact gap for one-handed testing
Safety according to CAT III 1000 V, CAT IV 600 V.
TÜV/GS-tested.
HT Instruments, 2009890, HT10 KIT, voltage tester, current tester, two-pole voltage tester
