Bernstein Tools for Electronics ESD Vice 9-240-ESD free shipping

219,99 €

VAT included

Free shipping

piece

Delivery time: 9-13 days

in the inflow

Free return shipment until 31.01.2026

219,99 €

VAT included

Free shipping

One article is not enough for you and you want to save money?

from 3 piece:	217,79 €	1,0% savings
from 5 piece:	215,59 €	2,0% savings
from 10 piece:	213,39 €	3,0% savings

Product description

Overview

Precision ball joint rotates 360°, infinitely variable fast voltage, quality product made in Germany
Sturdy mounting frame with adjustable and swiveling holders
With spring for sensitive circuit boards, angle adapter for greater tilt
Board holder adjustable from 25 mm to 270 mm
For connecting, for workbenches of max. Table cover thickness of 80 mm
Angle of inclination +/- 45°
With 6 bits. ESD earth lead 1 MOhm, length 1.8 m for connecting to an EBP / earth bonding Point
Materials steel, plastic, aluminum casting with ESD powder coating black, conductive 10^7 to 10^8 Ohm

Description

With the SPANNFIX VARIO, PCBs/boards of up to a length of 270 mm can be clamped. The board can be positioned and held securely in all directions by the continuously adjustable ball. A quick rotation of the PCBs/boards is possible thanks to the adapter. Very helpful as a third hand for soldering or populating, sensible clamping and holding device with quick release mechanism.

Characteristics

The Bernstein ball-joint holder has a continuously adjustable - 360° rotating and +/- 45° inclinable - ball, with external thread for all possible devices and instruments. These can thus be tilted in any direction, allowing for fast, individual and mobile alignment in any position. With a simple lever movement, the ball head is released in the cone pan, individually aligned and tightened. Without any locking, the ball-clamping offers an extremely strong hold. By means of the adjusting screw at the lower seat of the ball, the ball course can be set from loose to very firm. Our product development is constantly working on the optimization and further development of our products. If you have any questions, improvements or suggestions, please do not hesitate to contact us.

Information

Connection thread M12 x 1.5 mm (special thread) suitable adapters are gladly requested directly Maximum torque: Ball-Ø 40 mm approx. 24 Nm, Ball-Ø 60 mm approx. 100 Nm Holding forces of the ball at the height of the threaded pin: Ball-Ø 40 mm approx. 45 kg (441N), Ball-Ø 60 mm ca140 kg (1.372N). Degreasing the ball increases the clamping force. Connection base: Table thickness max. 80 mm Screw base: 4 x 9 mm through holes Magnetic base: Holding force 32 kg horizontal, 15 kg vertical (magnet without cap) ESD models: Discharge value 10^7 and 10^8 Ohm EPA suitable. For working in electrostatically protected areas (ESD workstation/ESD protection zone). The foot parts can be attached at the earthing point with a 10 mm push button. Aluminium castings powder-coated steel parts chrome-plated, stainless Please note for safety-relevant parts that we cannot give up any security of the holding forces without knowing your specific application. The sphere can behave differently under different physical conditions than in our test laboratory with an optimal test environment.