Aim TTi MX180T Bench PSU (adjustable voltage) 0 - 120 V 0 - 3 A 18 W, 180 W No. of outputs 3 x

This offer is only valid for business customers
Environmental tax included 1,20 €
Aim TTi MX180T Bench PSU (adjustable voltage) 0 - 120 V 0 - 3 A 18 W, 180 W No. of outputs 3 x
This offer is only valid for business customers
Environmental tax included 1,20 €

Product description

Overview

No. of outputs 3 x
- Output 1
- Output 1
18 W, 180 W
The MX 180 T (895-2491) has two outputs with a performance of each 0 to 30 V at 0 to 6 A as well as a third output with an output of 0 to 5.5 V at 0 to 3 A. Each output has simultaneous measurement with high resolution, switchable remote scanning and an individual output switch. The MX180 TP (895-2495) contains USB, RS232, GPIB and LXI-compatible LAN interfaces. They offer a full remote control and remote-controlled reading and are used for voice applications at a high level by an IVI-drivers are supported.
The Aim Series-TTi MX offers an impressive power density due to the combination of schalt-vorregulierung with high frequency with linear after adjustment, in order to deliver the performance of a completely linear design. Excellent phase and load balance is with low noise level and good transient response. In order to be used in a variety of applications, each output via more than one area. Outputs one and two c

Description

The MX180T has two outputs, each rated from 0 to 30V at 0 to 6A, and a third output rated from 0 to 5.5V at 0 to 3A. Each output has high resolution simultaneous measurement, switchable remote sensing and an individual output switch. The MX180TP includes USB, RS232, GPIB and LXI compatible LAN interfaces. These provide full remote control and remote readout and are supported by an IVI driver for high level voice applications. The Aim-TTi MX Series offers impressive power density by combining high frequency switching pre-regulation with linear post-regulation to deliver power close to that of a fully linear design. Excellent phase and load balancing is matched with low noise and good transient response. To be used in a variety of applications, each output has more than one range. Outputs one and two can provide either 60 V/3 A or 15 V/10 A as an alternative to 30 V/6 A, while output three can provide 12 V/1.5 A. If higher power is required, outputs one and two can be combined to provide up to 360 watts either as 30 V/12 A, 15 V/20 A, 60 V/6 A or 120 V/3 A from a single output.

Characteristics

Three high performance outputs, two with 180 Watt each and one with 18 Watt
Total power of 378 Watt in a very compact package
Switching the measuring range offers up to 120 Volt and up to 20 A
21 series combinations for maximum flexibility
Up to 360 Watt from a single output
Low output noise and low ripple over Linear end control
High setting resolution of 1 mV and 1 mA
Variable overvoltage and overcurrent protection tripping at all outputs
50 setting memories per output and 50 linked memories
Selectable voltage tracking (isolated tracking)
Selectable averaging of the current meter;Switchable remote scanning at all outputs
Graphic LCD provides simultaneous output measurement display
Numeric or rotary control of all parameters
Individual or combined output on/off with programmable delay sequencing
Front panel lock with optional passcode protection
3U chassis for table or rack mounting

Keywords

04016139066035, 4016139066035, Aim TTi, 51154-0100, MX180T, 895-2491

Product specifications

Downloads

Reviews

{{#if results}}
{{/if}}