- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 12000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.22 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 348 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 1,316 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
The drive is equipped with a collet chuck tool mount for shank tools. The air outlet duct from the compressed air drive is located at the rear. The powerful drive has a built-in centrifugal control. The lever valve also allows the drive to have a dead man circuit. The compressed air drive must be used with oil. 1 m and 2 m air supply hose with 1/4" external thread connection and plug-in socket with thread (STGI), chuck 6 mm, 2 wrench.
Technical data
- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 12000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.22 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 348 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 1,316 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
Benefits:
- The built-in centrifugal control ensures a constant speed when used.
- Safe working by dead man connection.
- Easy to run at medium power.
- Due to its wide extension design, the drive is ideal for working in hard to reach places.
- No dust swirling on the workpiece side.
Safety Instructions:
- The drive must be operated at the specified oil drop rate to prevent premature failure.
A constant speed is ensured by the built-in centrifugal control · Safe working with dead man's circuit · Easy to run at average power · Through the design with broad extension the drive is optimally suitable for working in hard to reach places · No dust swirling on the workpiece side.
The drive must be operated at the specified oil drop rate to prevent premature failure.
PFERD, 80107021, PGAS 6/120 VB-HV, pneumatic tools, oneumatic tool
