- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 25000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.95 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 218 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 0.75 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
The drive is equipped with a collet chuck tool mount for shank tools. The air outlet duct from the compressed air drive is located at the rear. Technically sophisticated compressed air straight grinder with rear exhaust outlet and dead man circuit through safety lever valve. The compressed air drive must only be used with oil. 1 m and 2 m air supply hose with 1/4" external thread connection and plug-in socket with thread (STGI), chuck 6 mm, 2 wrench. Through the lever valve, the drive has a dead man gear.
Technical data
- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 25000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.95 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 218 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 0.75 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
Benefits:
- The compact design makes it easy to access.
- No dust swirling on the workpiece side.
- The built-in centrifugal control ensures a constant speed when used.
- Safe working by dead man connection.
- Easy to run at medium power.
Safety Instructions:
- The drive must be operated at the specified oil drop rate to prevent premature failure.
The compact design makes easy access · No dust swirling on the workpiece side · A constant speed is ensured by the built-in centrifugal control · Safe working with dead man's circuit · Easy to run at average power.
The drive must be operated at the specified oil drop rate to prevent premature failure.
PFERD, 80107086, PGAS 6/250 HV, pneumatic tools, oneumatic tool
