- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 16000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.39 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 380 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 1,091 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
The drive is equipped with a collet chuck tool mount for shank tools. The air outlet duct from the compressed air drive is located at the rear. The handy compressed air drive must be operated with oil. 2 m air supply hose with 1/4" thread connection and plug-in socket with thread (STGI), chuck 6 mm, 2 wrench.
Technical data
- Operating pressure: 6.3 bar
- Power: 650 watts
- Speed: 16000 RPM
- Clamp clamp group: 7
- Valve version: Lever
- Design: Without extension
- Metric width: 41 mm
- Air consumption, idle: 0.39 m³/min.
- Air consumption, with load: 0.71 m³/min.
- Incl. Ø Collet [mm]: 6 mm
- Length metric: 380 mm
- Number of oil drops [min]: 6 pieces
- Net weight: 1,091 kg
- Inner ø supply hose: 8 mm
- Exhaust air outlet: Rear
- Height: 41 mm
Benefits:
- Extended design, making it ideal for working in hard to reach places.
- No dust swirling on the workpiece side.
- Safe working by dead man connection.
Safety Instructions:
- The drive must be operated at the specified oil drop rate to prevent premature failure.
Extended design, thereby optimally suitable for working in hard to reach places · No dust swirling on the workpiece side · Safe working with dead man's circuit.
The drive must be operated at the specified oil drop rate to prevent premature failure.
PFERD, 80706071, PGAS 6/160 V-HV, pneumatic tools, oneumatic tool
