CPU:Rockchip RK3566 Quad Core Processor Cortex-A55 ARMv8-A @1.8 GHz
GPU:Mali-G52 MP2-GPU @800 MHz
NPU: 0.8 TOPS@INT8, INTEGRATED AI ACCELERATOR RKNN NPU
RAM: 8 GB LPDDR4 with 32-bit bus width, data rate: 2112 MT/s, up to 1,055 MHz
Memory: 64 GB embedded eMMC (soldered to the board)
The OROID-M1S Single Board Computer has been developed for use in a variety of embedded system applications and, unlike the previous version, the M1, has become around 20% thinner, requires 20% less power consumption, offers 14 additional I/O pins and now has a 64 GB eMMC onboard memory.
Micro-SD slot (UHS-I SDR104, boot priority is always higher than eMMC)
NVME M.2 SSD (PCIe 2.1 x 1 Lane)
10/100/1000 MBit/s Realtek RTL8211F RJ45 LAN
HDMI 2.0 (up to 4K@60Hz with HDR, EDID) / MIPI DSI interface
USB 2.0 host port/USB 3.0 host port/USB 2.0 micro-OTG port/UART
GPIO connections: 40-pin GPIO and 14-pin GPIO
Other: RTC backup battery connection
POWER SUPPLY 5 V USB-C @3 A
Power consumption 1.1 W / 3.52 W (idle / full load)
Floor stands (LxBxH) 90 x 65 x 16 mm
ODROID, G231031113445, M1S, arduino, raspberry pi, raspberry
