ARM Cortex-A76 and Cortex-A55 Octa-Core architecture
Energy efficient design and compact form factor
Integrated 64 GB eMMC memory for fast data processing
16 GB LPDDR5 RAM for demanding applications
Multiple input and output ports for expandability
The OROID-M2 is a low-cost single board computer with an ARM Cortex-A76 quad core and an ARM Cortex-A55 quad core that offers high energy efficiency and a sleek design. It is equipped with numerous inputs and outputs and is suitable for versatile applications.
The OROID-M2 impresses through its high efficiency and energy-efficiency. With its ARM Cortex-A76 and Cortex-A55 processors, it offers an optimal combination of computing power and low power consumption. The integrated 64 GB eMMC memory enables fast data transfer rates and together with 8 GB LPDDR5 RAM the device is suitable for memory-intensive applications. The slim design and numerous connection possibilities make the OROID-M2 a flexible solution for different application scenarios.
Processor: Rockchip RK3588S2
Quad Core Cortex-A76 (2.3 GHz +/- 0.1 GHz)
Quad Core Cortex-A55 (1.8 GHz)
ARMv8-A architecture with neon and crypto extensions
Mali-G610 GPU MP4 (1 GHz)
Storage Architecture:
64 KB L1 command cache, 64 KB L1 data cache, 512 KB L2 cache shared by Cortex-A76 processor
32 KB L1 command cache, 32 KB L1 data cache, 128 KB L2 cache shared by Cortex-A55 processor
L3 data cache: 3 MB shared by 8 processors
NPU: 6 TOPS@INT8, INTEGRATED AI ACCELERATOR RKNN NPU
LPDDR5 8 with 64-bit bus width
Memory:
1 x 64 GB eMMC (soldered on to the board)
1 x MicroSD slot (UHS-I SDR104)
Boot priority can be selected between eMMC and microSD via sliding switch
1 x NVMe SSD (PCIe 2.1 x 1 lane)
Network: 1 x GbE port (RJ45, supports 10/100/1000 Mbps)
Green LED: Flashing on traffic at 100 Mbps connection
Yellow LED: Flashing for data traffic on 1000 Mbps connection
Video output:
1 x HDMI 2.0 (up to 4K@60Hz with HDR, EDID)
1 x MIPI DSI interface (30-pin connector, different from the 31-pin connector of the OROID-M1)
1 x DP (via USB Type-C port)
External I/O:
1 x USB 2.0 host port
1 x USB 3.0 host port
1 x USB 3.0 Type-C (data communication and DP old mode, no power source/sink)
1 x debug serial console (UART)
1 x 40 pin GPIO and 1 x 14 pin GPIO
Real-time clock (RTC):
On-board power-saving PCF8536 RTC chip
CR2032 RTC backup battery holder, holds time and date up to 10 years without main power supply
Key features:
On/Off switch
Reset key
System LED indicators:
Red (Power) - Permanent light with a connected DC power supply
Blue (ALIVE) - Blinking like a heartbeat when the kernel is running. Continuous light in submarine status.
Power supply:
1 x DC-socket: Outer diameter 5.5 mm, inner diameter 2.1 mm
DC-input voltage range 7.5 V ~ 15.5 V (12 V/2 A power supply recommended)
IDLE: Approx. 1 W without peripherals
CPU stress: Approx. 7.5 W (performance
ODROID, ODROID-M2/16GB, arduino, raspberry pi, raspberry
