| from 3 piece: | CHF 28.71 | 1,0% savings |
| from 10 piece: | CHF 28.13 | 3,0% savings |
| from 50 piece: | CHF 27.26 | 6,0% savings |
12 mm high segments for an even longer shelf life
High-power cutting disc with extremely wide range of applications
Specially shaped Turbo-segments increase the cutting speed and optimize the removal of the cutting particles
Wet and dry cut
Laser-welded
The LD 300 offers maximum performance and an optimized service life in an extremely wide range of applications from medium-hard to hard material. The quality was specially developed for angle grinders. The 12 mm high diamond segments provide with its special design for a quick removal of the cutting particles and thus for the optimized durability. The LD 300 impresses at the same time through a high cutting speed and optimized service life. Laser-welded. Suitable for wet and dry cut.
Machine suitability: The LD 300 diamond cutting disc is suitable for manual use with the angle grinder. It can play its full strengths on machines of all power classes and especially on high-performance machines. Material suitability: The LD300 was specifically designed for machining hard brick, reinforced Beto, reinforced concrete, Beto n, paver, Hard stone, pavements, Beto pipes, curbstones, medium-hard marble bricks, hard sand lime brick, hard Beto brick, Block stones, sandstone, hollow blocks, Asphalt, fresh concrete and soft Beto brick are developed. This RHODIUS quality tool is also very suitable for working with paving stones, slate and roofing tiles made from Beto n. Construction and production: The LD300 has a segmented cutting edge. Thus a very high cutting speed with simultaneous maximum service life is achieved. The tool is tested according to EN13236 and OSA and can be used in wet cut and also in dry cut. Thanks to the high-quality industrial diamonds and a very high diamond concentration, the LD 300 is especially powerful. The disc is laser-welded. Quality: The LD 300 gives the user the best RHODIUS tool in his category. RHODIUS Topline products stand for the highest level of performance and quality. Dimensions: This diamond cutting disc is available in diameters from 115 mm to 500 mm.
Rhodius, 304461, cutting disc, cutting discs
