RJ45 module With locking function Keystone CAT 6 Renkforce KSV10

Overview

Suitable for network distributors and patch panels
Category 6 (tested at 250 MHz)
Strain relief via cable tie
Tool-free installation
Keystone module is lockable

Description

The keystone module is suitable for network distributors, patch panels and network sockets with standardised keystone receptacles.

Locking mechanism
The keystone jack is lockable. If locked, the connected network cable cannot be detached. To unlock is the special tool (Renkforce RF-431) is required No.: 1477 Afterwards, the cable can be disconnected without any problems.

Compatible with all common patch cables. No more expensive stock-keeping of customised patch cables of various lengths. Locking is a simple way of preventing connected devices being removed by unauthorised parties. This helps IT support cut back maintenance times.

Easy and tool-free installation
Fitting the RJ45 jack doesn't require any speciality tools. Use your tumb to connect the cable. All leads are pushed in one after another, and not, like with other tool-free modules, all at the same time. Simply close the cover

Use side cuter to cut excess cable lengths. Done

Strain relief via attached cable tie.

Characteristics

Compatible with all common AWG 22 - 26 patch cables
Width: 17.3 mm
C6 EIA/TIA 568C compliance
Housing: metal
Board: FR-4/UL-94 V0
IDC cap: fire-resistant PC
IDC body: fire-resistant ABS UL-94 V0
IDC pin: tin-plated phospho bronze
Insulation resistance: 500MΩ (min.)
Contact resistance: 20MΩ (max.)
Current rating: 1.5A
DC resistance: 0.1Ω (max.)
Voltage: 1000 VAC RMs @ 60Hz/1 min
IDC punch down cycle: over 250 cycles (min)
Jack insertion cycle: More than 2000 cycles (min)

Delivery content

• Keystone jack

Keywords

04016139082400, 4016139082400, Renkforce, RF-4308249, KSV10, KSV