Micro-Swiss Hot end Suitable for (3D printer): Creality CR-10 FlowTech™ Hotend M3102

Overview

Leak-proof nozzle
Cold nozzle change
High throughflow
All-metal design
300 °C maximum temperature

Description

The FlowTech™ hotend is a hotend series of the new generation of microswiss. Its unique design eliminates frequent hot-end problems such as leaking nozzle seals and costly nozzle changes.

The FlowTech Hotend is designed as a simple drop-in upgrade for the Creality CR-10 SE. Z height, construction volume and firmware remain unchanged.

Made in the USA by Microswiss

Compatibility
- Creality CR-10 SE

Leak-proof nozzle:
Do you have enough of leaking nozzles that ruin your prints and waste filament ? The FlowTech Hotend combines nozzle and thermal block in a permanently sealed unit to ensure a leak-proof hotend.

Cold nozzle change:
The nozzle change used to be time consuming and potentially dangerous. With a FlowTech hotend the nozzle can be changed easily without the need to heat up the hotend – and with just one hand.

High throughflow
The cylindrical ceramic radiator and the 28.6 mm large melting zone ensure an excellent volume flow.

All-metal design:
Durable! The FlowTech Hotend has a full metal design that is suitable for most modern 3D printing filaments. The entire hotend is manufactured and assembled in-house. A multi-stage quality control is performed during the manufacturing process. Finally, each hotend is subjected to a comprehensive temperature change test before packaging.

300 °C Maximum temperature:
This hotend is designed for a temperature of 300 °C and has a specially designed NTC thermistor for each printer. This special version is perfectly adapted to the CR-10 SE, so that no firmware changes are necessary.

Delivery content

• 1x FlowTech™ heater core (24 V – 60 W);
• 1x FlowTech™ brass coated 0.4 mm nozzle;
• 1x copper thermal adapter;
• 2x Titan-fixing screws;
• 1x silicone sleeve;

Keywords

Micro-Swiss, M3102, FlowTech™ Hotend