akYtec ITP17 149534 Display module 24 V DC

Overview

Three-color seven-segment display (green, red, yellow)
Configurable analogue input (0-5 mA, 0(4)-20 mA, 0(2)-10 V), RTDs and thermocouples
Programming via MicroUSB
ON/OFF control: Contains an NPN output for ON/OFF control
Operating modes: Continuous display of the measured parameter, three-color display according to thresholds
Standardized design and fits in a standard 22.5 mm bore for indicator lamps
Digital filter
Display area -999 ... 9999
Adjustable decimal point position

Description

The ITP17 is a universal display device for monitoring industrial processes. It has a three-color display that shows the parameters in green, yellow and red. You can adjust the color change thresholds to suit your specific needs. The ITP17 simplifies the selection process by allowing it to be directly connected to a variety of sensors, including sensors for temperature, level, pressure, humidity, etc.
The ITP17 Indicator Setup allows you to configure any user-defined color change threshold and the corresponding colors within the signal measuring range. The only rule is that the thresholds for each subsequent color zone must be greater than the previous threshold.
The indicator is supplied with 24 V direct current. It has the protection class IP65 and can be operated in a temperature range of -40 to +60 °C.

Delivery content

• ITP17
• User manual
• Gasket
• Mounting nut

Keywords

akYtec, 149534, ITP17, plcs, plc, programmable logic controller