Determines all common hardness parameters
Large measuring range
High accuracy
Instant indication on the display
Measurement possible in different positions
Measuring principle according to the rebound procedure
Measurement on many materials
Durometer PCE-2500N of the PCE-2500N metal hardness tester convinces through its simple operation. The metal hardness tester is not larger than a conventional ball-point pen. Location-free measurements are thus easily possible with the metal hardness tester. The non-destructive hardness measurement of the surface is carried out by a striking body which hits the metal and then directly shows the measured value on the display. With the metal hardness tester, the parameters HRC, HRB, HRA, HB, HV and HS can be partly applied to the materials steel, cast steel, alloyed tool steel, stainless steel, cast iron, Spheroidal casting, cast aluminum alloy, brass, bronze and tin bronze. Furthermore, the metal hardness tester has an internal read-out memory, whereby it must be ensured that it cannot be read from a computer. The measuring principle of the metal hardness tester is the rebound process by a type D. impact device
04250348716064, PCE Instruments, PCE-2500N
