The FIS VL is approved for use in cracked concrete and masonry and has a high load capacity there. Vinyl ester-based 2K injection mortar. The temperature resistance of the FIS VL injection mortar from –40 °C to +120 °C enables a solid load level even under high temperature requirements and thus increases the flexibility during processing.Inserted cartridges can be reused by changing the static mixer.
Now secure the FIS VL 300 T in the practical Sixpack for a comfortable transport. The fischer FIS VL 300 T assembly mortar is a vinyl ester-based 2K injection system. Resin and hardener are only mixed and activated when pressing out of the static mixer. The mounting mortar can be processed particularly economically with a commercial sealing material extrusion gun. Attached cartridges can be reused with a new static mixer. With approved system components such as FIS A anchor rods, internal threaded anchors and injection armature sleeves for concrete and masonry fastening, the hybrid system offers many indoor and outdoor applications.
Approved for anchorages in: Concrete C20/25 to C50/60, torn hollow block made of lightweight concrete High-hole brick limestone perforated brick limestone-brick solid brick reinforcement connections porous concrete. Also suitable for concrete C12/15 hollow block made of concrete. Steel constructions; wooden constructions; railing, facades; stairs; Steel consoles; machines; masts; awnings; canopies; Gates; Consoles; Pipes; Grills satellite antennas.
FIS VL is a vinyl ester-based 2K injection mortar. Resin and hardener are stored in two separate chambers and are only mixed and activated in the static mixer when pressing out. The mortar is injected without bubbles from the drill hole base HER. The mortar sticks the mounting element fully to the bore hole wall and seals off the bore hole. The FIS VL 300 T mounting mortar can be used with a commercial silicone extraction device without the need for special tools. Broken cartridges can be reused by changing the static mixer.
Fischer, 576809
