Overview
With limit stop and polarity change-over
With limit stop and polarity change-over
These point operating units allow you to build reproduction points in all tracks.
Accurate assembly and adjustment of the strong lower floor panel drive are particularly simple: Push rod in the centre position and fix, bring the flank pointers in the central position, connect the flanks-adjusting lever and push rod with the spring wheel wire, release the connecting rod - done! Setting time 0.2 s at 12 V. · For points with an electrofrog the drive is equipped with a built-in change-over switch. The outputs for the heart of reversal can also be used for feedback.
3 point drives · 6 spring steel wires of different hardness · Drilling templates · User manual.
426c112