Metrel MI 3210 Insulation tester 50 V, 10000 V 20 TΩ

Overview

Insulation measurement;Diagnostic test (PI, DAR, DD);Step voltage test;Dielectric strength test (DC) up to 10 kV;Voltage and frequency measurement up to 550 V TRMS

Description

MI 3210 TeraOhm XA 10kV is a portable, mains or battery powered tester with excellent IP protection (IP65) designed for insulation resistance diagnostics using high DC test voltages up to 10kV. Due to its robustness (CAT IV protection) and high immunity to interference from radiated high-frequency fields, it is ideally suited for use in industrial environments.

Insulation resistance up to 20 TΩ;
Adjustable test voltage (50 V) (50 V)...10 kV) in 50 V and 100 V steps;
Programmable timer;
Capacity measurement;
Charge rate for a capacitive load 3 s / µF at 10 kV;
Automatic discharge of the test sample after completion of the measurement;
Test leakage terminal
Determination of high voltage failures;
User-defined tests
Automatic setting function
Measurement results in numerical and graphical form;
Measurement results in numerical and graphic form;
Charge rate for a capacitive load 3 s / µF at 10 kV;
Automatic discharge of the test sample after completion of the measurement;
Test leakage terminal
Determination of high voltage failures;
User-defined tests
Automatic setting function
Measurement results in numerical and graphical form
PC software HVLink PRO for download and analysis of test results and generation of test reports;
Insulated RS232 and USB communication ports, BT interface;
High quality standard accessories, including shielded test leads;
High protection against electromagnetic interference: Noise filter at the AC current input (1 mA 600 V) and additional averaging of the result (5, 10, 30, 60);
CAT IV / 600 V;
Power supply via mains and battery.

Software
PC Software HVLink PRO is optionally available software for transferring the measurement results from the instrument to PC.

Information

Supplied with German license.

Delivery content

• Device MI 3210 TeraOhmXA 10kV
• shielded test lead with test probe 10kV, 2m
• shielded test lead 10kV, 2m, 2 pieces (black, red)
• crocodile clip 10kV, 2 pieces (black, red)
• discharge cable green, 2m
• crocodile clip, green
• mains cable
• PC software HVLink PRO with USB and RS 232 cable
• instructions for modern insulation tests on CD
• operating instructions on CD
• ISO calibration certificate

Keywords

Metrel, 20992232, MI 3210, electrical isolation test, resistance test, resistance tester