Overview
Independent operating device
Protection class II, SELV output
Flicker-free design
Constant current + constant voltage
IP20
Protected against overload, short-circuit, over-voltage and temperature protection
For LED applications
Self Electronics SLT6-350ILS LED driver Constant voltage, Constant current 7.94 W, 7.31 W 350 mA 7.5, 24.0 - 21.0, 24.0 V DC
Currently not available
Setup notification
Notification should be active for:
Send notification by e-mail to:
Note: If the article is not available again within your desired period, your inquiry will be deleted.
Currently not available
Setup notification
Notification should be active for:
Send notification by e-mail to:
Note: If the article is not available again within your desired period, your inquiry will be deleted.
Product description
Description
The SLT6-350ILS and SLT6-700ILS constant current and constant voltage power supplies from Self Electronics offer high performance in addition to a very compact housing and attractive price.
The SLT6-ILS series meets all requirements of the SELV standard for protection against electric shock and is also protected against interruption, short circuit, overload and overheating. After an error condition has been corrected, an automatic restart takes place.
The low power consumption of 0.3W in standby mode and the fast start time meet the requirements of the ERP guidelines. Even under unfavourable operating conditions and with a maximum housing temperature of 80°C, the SLT6-ILS LED power supplies achieve a nominal service life of 30,000 hours. The MM symbol allows mounting on materials with unknown flammability properties.
The SLT6-ILS power supplies from Self Electronics meet the current EN standards.
Characteristics
independent control gear
protection class II, SELV output
flicker-free design
constant current + constant voltage
IP20
protected against overload, short circuit, overvoltage and temperature protection
EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc.
for LED applications
Information
Caution!
Make sure you pick an LED driver/transformer that comes with the appropriate power rating.
Choose a driver/transformer that supplies approx. 30 pecent more watttage,
as the current consumption (i.e. amperage) of the LEDs is key, and not the power rating of the LED provided by the LED manufacturer.
Keep in mind that the switch-on surge tend to be much higher.
Keywords
Self Electronics, SLT6-350ILS, led, led power supply, led power supply unit