Overview
Independent operating device
Protection class II, SELV output
Constant voltage
IP20
Protected against overload, short-circuit, over-voltage and temperature protection
For LED applications
Self Electronics SLT100-12VFG LED driver Constant voltage 96 W 0 - 8.33 A 12.0 V DC Approved for use on furniture, not dimmable
Image is similar
CHF 33.00
VAT included
plus
Delivery time:
3-4 days
in stock
Free return shipment until 31.01.2026
CHF 33.00
VAT included
plus
Product description
Description
The SLT100-VFG-UN series of super-flat LED power supplies from Self Electronics are now available. They were developed especially for modern LED lighting applications in the indoor area and have a particularly compact design. Thanks to the flat profile with a height of only 16.5 mm, easy installation is possible, e.g. in confined spaces and in or behind cabinets. With an efficiency of up to 91.5%, the highly efficient SLT100-VFG series power supplies from Self are suitable for mounting on materials with unknown flammability characteristics (MM symbol) and can also be used as independent control gear outside luminaires. With a stand-by power consumption of less than 0.3 watts and a start-up time of less than 500ms, the LED power supplies meet the current oködesign specifications. In addition, they meet the relevant EMC and safety standards, are ENEC-certified and have an operating expectation of up to 50,000 hours, referred to a housing temperature of 85°C. Their output is SELV compliant, the power supplies provide protection against open circuit, short circuit, overload and overheating. After a cause of error has been rectified, an automatic restart is performed. The SLT100-VFG series is now available with a 5-year warranty.
Characteristics
independent control gear
Protection class II, SELV output
Constant voltage
IP20
Protected against overload, short circuit, overvoltage and temperature protection
EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc.
Information
Caution!
Make sure you pick an LED driver/transformer that comes with the appropriate power rating.
Choose a driver/transformer that supplies approx. 30 pecent more watttage,
as the current consumption (i.e. amperage) of the LEDs is key, and not the power rating of the LED provided by the LED manufacturer.
Keep in mind that the switch-on surge tend to be much higher.
Keywords
04021087039710, Self Electronics, SLT100-12VFG, led, led power supply
Product specifications
Downloads
Reviews
{{#if results}}
{{/if}}
{{results.[0].headline}}