Self Electronics SLT30-12VLG-ES LED driver Constant voltage 30 W 0 - 2.5 A 12.0 V DC Approved for use on furniture, not dimmable

CHF 13.35
VAT included
plus
Delivery time: 3-4 days
in stock
Free return shipment until 31.01.2026
Self Electronics SLT30-12VLG-ES LED driver Constant voltage 30 W 0 - 2.5 A 12.0 V DC Approved for use on furniture, not dimmable
CHF 13.35
VAT included
plus
One article is not enough for you and you want to save money?
from 3 piece: CHF 13.21 1,1% savings
from 5 piece: CHF 13.08 2,0% savings
from 10 piece: CHF 12.94 3,1% savings

Product description

Overview

Independent operating device
Protection class II, SELV output
Constant voltage
IP20
Protected against overload, short-circuit, over-voltage and temperature protection
For LED applications

Description

With the 30 Watt series SLT30-VLG-ES from Self Electronics we now offer you high-quality new 12 Volt and 24 Volt constant voltage power supplies. Thanks to optimized circuit topology and efficient production processes, the power supply products SLT30-12VLG-ES and SLT30-24VLG-ES have a very good price/performance ratio. The low power consumption of the power supplies in standby mode and a start-up time of less than 500ms meet the requirements of the ERP guidelines. Even under unfavourable operating conditions and a maximum housing temperature of 75°C, the Self LED power supplies achieve a nominal service life of 35,000 hours. Additional safety is provided by protection against interruption, short circuit, overload and overheating. The MM symbol permits mounting on materials with unknown flammability properties, and can also be used as an independent control gear. The SLT30-VLG-ES series from Self meets all current EN standards and is available immediately with a 3-year warranty.

Characteristics

independent control gear
protection class II, SELV output
constant voltage
IP20
protected against overload, short circuit, overvoltage and temperature protection
EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc.
for LED applications

Information

Caution!

Make sure you pick an LED driver/transformer that comes with the appropriate power rating.
Choose a driver/transformer that supplies approx. 30 pecent more watttage,

as the current consumption (i.e. amperage) of the LEDs is key, and not the power rating of the LED provided by the LED manufacturer.
Keep in mind that the switch-on surge tend to be much higher.

Keywords

04021087039383, Self Electronics, SLT30-12VLG-ES, led, led power supply

Product specifications

Downloads

Reviews

{{#if results}}
{{/if}}