Ledlenser EX4 Torch Ex Zoning: 0, 20 50 lm 35 m

Overview

Extremely light (65 g incl. batteries)
Extremely small and handy (L 14.0 cm)
Battery-powered with 2x AAA, alkaline
Suitable for Ex-Zone 0/20 with gases up to IIC and T4 or dusts up to IIIC and T135 °C.

Description

Extremely light, extremely small, extremely handy – and like made for the flexible use in an explosive working environment. The Ledlenser EX4 was specially designed for Ex zone 0/20. It is approved for the best possible gas and dust groups IIC and IIIC in zones 0, 21, 2 and 20, 1 or 22 (Ex ia op is IIC T4 Ga, Ex ia op is IIIC T 200 135°C Da). With just 65 g you can forget that a full-grown Ledlenser is in your shirt pocket. Even better if you always have it at hand in tight situations.

Characteristics

Power light function · End Cap Switch · Magnetic switch for a simple use with gloves · Suitable for Ex-Zone 0/20 · Advanced Focus System

Information

Measured values according to ANSI/PLATO FL 1 in the respectively mentioned setting. If no setting is explicitly specified, the values for luminous flux (lumen/lm) and illumination range (meter/m) refer to the brightest setting and the values for running time (in hours) to the lowest setting. A boost function (if available) can be used several times, but only briefly available at a time. In case the lamp is fitted with colored LEDs, the measured values are indicated with white light or the white LED. If the lamp has different power modes, then the "energy saving mode" is the basis for the measurement.

Delivery content

• Torch EX4
• 1 battery set
• User manual.

Keywords

04058205000437, Ledlenser, 500682, EX4, 175-2420, fire and rescue services