Measuring and displaying the signal values from different resistance thermometers and thermocouples.
Linear voltage signal scaling
Adjustable decimal point position
Display range -999 … +9999
On/Aus-Regelung with a NPN output
Square root function (for special transmitter)
Digital filter
Alarm function (flashing with setpoint is exceeded)
Error message with a lower/exceeding the Measurement Limits
Error message in the event of wire break or short circuit
The Itp 16 is a temperature display for monitoring and control of industrial processes. The display has a configurable analogue input for signals from resistance thermometers and thermocouples, and via a digital output. This NPN transistor output, there is a load of up to 200 mA/42 VDC control, whereby a two-point control can be implemented. This can also be output as an alarm output can be used. This temperature display also supports an alarm function. If this function is switched on, the display will start with a frequency of approximately 2 Hz to flash, if the process value exceeds the setpoint values. The device has a compact, standardised design and fits in a standard 22.5 mm bore. This enables a quick and easy installation and many displays can be used in a switch cabinet or in a control panel can be accommodated.
Analog input for TC and RTD signals
Digital output with NPN Transistor
Power supply 24 V DC
04053199906024, akYtec, ITP16-G, voltage display, panel meter
