MegaSat HD 1 smart SAT finder kit

Overview

Simple and fast satellite search with Bluetooth ® connection
Additional functions in the same way as a conventional Satmessgerat
Incl. Power Bank 10,000 mAh

Description

Satmessgerat HD 1 Smart
Measurement of DVB-S and DVB-S2 with preset satellite/transponders. Bluetooth ® connection to a mobile device. Free app for iOS and Android with additional functions like a conventional Satmessgerat.

Simple and fast satellite search with Bluetooth ® connection
The HD1 Smart is a satellite finder with all standard functions for satellite search. The pre-programd satellites as well as transponders can be easily select and make it easier to search considerably. You can immediately on the basis of the LED displays the signal strength and quality assessment and align the antenna comfortably. Due to the additional Bluetooth ® connection to a mobile device, such as Smartphone, the Satellite Finder by helpful functions.

Additional functions on the mobile device
Through the free app, now you receive now a spectrum, a constellation as well as the displays of dbμV, MER, C/N, BER, the signal to analyze and to be able to adjust the antenna perfectly. Via the mobile device, you can now also the satellites and transponders to your needs. In addition, you can also with the angle calculation the vertical (elevation) and horizontal (azimuth) alignment of the antenna. In this way, the desired satellite to be found more quickly.

Power bank with charging function and LED torch
With the included power bank can also be easily adjust your antenna without connection to the receiver. The Satmessgerat HD 1 Smart required for operating a power supply that is usually from the receiver. With the power bank are independent and can the antenna can also be mounted without receiver with electricity. The charging of additional devices such as Smartphone or tabelt is also possible. To do this, use one of the two USB connections. With the built-in LED torch, the antenna aligns even in case of a bad visibility.

Characteristics

Measurement of DVB-S/S2 · DiSEqC 1.0 / 1.1 / 1.2 · Uni EN 50494/EN 50607 · Frequency range: 950 - 2150 MHz · LNB voltage: 13/18V, max. 500 mA · Input Level: Min. 35 dBμV · Output level max. 90 dBμV · Input resistance: 75 Ω · Displays: Signal strength/quality, 13 V, 18 V, 22 K, Lock, short-circuit, Bluetooth, satellite, transponder · Preset satellites: 8 (Astra 1, Hotbird and Astra2,…) · Preset Transponder: 8 · Speaker with signal tone · USB connection for an external power source such as Power bank · Bluetooth ® for connection to a mobile device · Power supply via receiver or USB · Power bank: · Lithium polymer battery (10,000 mAh) · 2 x USB output (DC 5 V, 1.0 A and DC 5 V, 2.1 A) · 1x Micro USB input (DC 5 V, 1.5 A) · LED LAMP · OLED display with capacity display · Power Button

Delivery content

Satmessgerat HD 1 Smart + Wrist strap + Micro USB cable + F connection cable (20 cm) + Powerbank + User manual.

Keywords

MegaSat, 2600019, HD 1 smart, sat finder, sat dish, sat locator

Other notes

Bluetooth® is a registered trademark of Bluetooth SIG, Inc. worldwide.