The Undercover-Jig-Set for hidden wood connections in the variant for cross-head screws (Pozidriv). Heart of this set is of the Undercover-Jig, a drilling template for pocket holes. With it, you can master corner, T and surface connection with invisible gland in just three steps. The board can be connected directly to the hole gauge measurement and then the appropriate practical pre-settings. Thereby you can save a further step. Also included in the set are a special drill bit, a depth stop, a hexagon wrench, Phillips screws (Pozidriv) with a suitable screwdriver blade (Pozidriv PZ2) and screw hole covers.
Adjustable stop pre-set For all common board thickness (from 12 mm) Measure the board thickness directly on the device Corner, T and surface connection with invisible gland With Phillips screws (Pozidriv) and screwdriver blade Pozidriv PZ 2.
1 Undercover Jig · 1 Step Drill Bit HSS, Ø 9.5 x 180 mm · 1 depth stop diameter 9.5 mm. · 1 hexagonal wrench SW 3 · 1 Pozidriv Screwdriver blade PZ 2, 150 mm long · 10 Screw Hole covers beech wood · Each 10 Phillips-head screws (Pozidriv) 4 x 25 mm, 4 x 30 mm, 4 x 40 mm, 4 x 60 mm.