Description
A tiny microprocessor-controlled on/off switch from SKYRC for RC models. A simple push button serves as a switch and thus eliminates the known problems such as loose contacts or similar which often arise with the mechanical switches. The plastic housing is sealed and can be installed in the model almost anywhere with double-sided adhesive tape thanks to its compact size, but with the three mounting holes it also finds an optimal place at the transponder bracket.
There are two different push button covers, so that the user can choose himself.
This switch also supports LiPo mode, if it is activated, the switch switches off automatically if the voltage is too low to protect the LiPo from deep discharge. However, this mode can of course be deactivated if other protective devices are already available or if the switch is running in NiMH/NiCd mode.
In addition, the switch informs you at all times about the current capacity status of the battery.
Set-up switch:
1. NiMH/NiCad battery packs
To switch on, press and hold the switch for one second. The Power "PWR" LED lights up. To switch off, press and hold the switch until all LEDs have gone out. The Power "PWR" LED signals the remaining capacity of the battery when switched on.
2. LiPo battery packs
To turn on, press and hold the switch for more than three (3) seconds. The Power "PWR" LED and LIPO LED are now lit. To switch off, press and hold the switch until all LEDs have gone out. The Power "PWR" LED signals the remaining capacity of the battery when switched on.