Description
Current relay, standby loss only 0.8 watts. Series installation device for mounting on mounting rail (1 TE). To do this, simply connect the N conductor to the clamp (N) and L to 1 (L). This results in an additional standby consumption of only 0.1 watts. If the contact is used to control switching devices that do not switch themselves at zero crossing, (N) should not be connected, as the additional closing delay otherwise causes the opposite. With an internal toroidal core converter, the alternating current flowing via a consumer V1 from 0.1A to a maximum of 32A is compared with the set value and if exceeded, a relay switches off within 0.5 seconds a consumer V2 connected to 2 or a consumer V3 connected to 3. Setting accuracy ±5%. Starting from 25A, the relay always switches on. The latest hybrid technology combines the advantages of wear-free electronic control with the high power of special relays. The current base A is set with the lower latching rotary switch A.