Description
Radio actuator heating cooling relay 230V. 1 normally open contact potential-free 10A/250V AC. Stand-by loss only 0.8 watts. Encrypted radio, bi-directional radio and repeater function can be activated. For panel mounting. 45mm long, 45mm wide, 33mm deep. If the supply voltage fails, the switching state is retained. With recurring supply voltage is switched off in a defined way. After installation, wait for the automatic short synchronization before connecting the switched consumer to the mains. This heating-cooling relay evaluates the information from radio temperature controllers or sensors. Window-door contacts, motion detectors, window-grip sensor FFG7B-rw and radio button may be added. The potential-free work contact controls valves. From week 11/14, encrypted sensors can be trained. Bidirectional radio and/or a repeater function can be switched on. Each function change (normal operation, lowering operation, off) is confirmed with a radio telegram. This radio telegram can be taught in to the GFVS software. Upper rotary switch for the operating modes. The LED accompanies the teach-in process according to the operating instructions and indicates radio control commands during operation by briefly flashing.