Hydra MKP_285_MSB 3uF 25x48 1 pc(s) MKP motor capacitor 3 µF 450 V AC 5 % (Ø x L) 25 mm x 48 mm

Overview

Self healing
Pulse strength
Low loss factor
environmentally friendly
Tested safety by 100% routine test
Any mounting position

Description

Hydra motor capacitors with pressure relief switch MKP technology series 285 Safety:Capacitors may fail under extreme operating conditions or after reaching their service life. Hydra motor capacitors are manufactured with a built-in pressure cut-off switch. In theBreakdown occurs in the capacitor due to gas formation and temperature rise, a pressure increase occurs. This causes a housing extension of up to 9 mm by stretching the folding seam and thusAn interruption of the feed line at the predetermined breaking point.The capacitor is safely disconnected from the mains.Hydra capacitors are certified by the VDE testing and certification institute and meet the requirements of safety class P0 according to EN 60252.Installation:Hydra motor capacitors can be mounted vertically or horizontally.In order to ensure proper triggering of the overpressure tear-off protection by the longitudinal expansion of the capacitor housing, a minimum distance of approx. 12 mm from the connection to neighboring components must be observed.Assembly:Metalized polypropylenePlastic housing with/without metal boltsPolyurethane casting, self-extinguishing

Delivery content

• Incl. nut and tooth-lock washer

Keywords

00048544840072, Hydra, 024401376381, MKP_285_MSB 3uF 25x48, thin film capacitor, thin film capacitors