Hydra MKP_500_MKB 80uF 65x165+x 1 pc(s) MKP motor capacitor Radial lead 80 µF 500 V AC 5 % (Ø x L) 65 mm x 165 mm

Overview

Safety by pressure-relief switch
Self healing
Pulse strength
Low loss factor
Tested safety by 100% routine test

Description

Hydra motor capacitors with pressure relief switch
MKP-Si technology series 500
Safety:
Capacitors may fail under extreme operating conditions or after reaching their service life. Hydra motor capacitors are manufactured with a built-in pressure cut-off switch. In the
Breakdown occurs in the capacitor due to gas formation and temperature rise, a pressure increase occurs. This causes a housing extension of up to 9 mm by stretching the folding seam and thus
An interruption of the feed line at the predetermined breaking point.
The capacitor is safely disconnected from the mains.
Hydra capacitors are certified by the VDE testing and certification institute and meet the requirements of safety class P2 according to EN 60252.

Installation:
Hydra motor capacitors can be mounted vertically or horizontally.
In order to ensure proper triggering of the overpressure tear-off protection by the longitudinal expansion of the capacitor housing, a minimum distance of approx. 12 mm from the connection to neighboring components must be observed.

Assembly:
Metalized polypropylene
Aluminum housing with/without metal bolts
Environmentally friendly filler (vegetable oil)

Delivery content

• Incl. nut and tooth-lock washer

Keywords

00048544840560, Hydra, 024401376431, MKP_500_MKB 80uF 65x165+x, thin film capacitor, thin film capacitors