Oszilloskope
- 70 MHz
- Anzahl analoge Eingänge max. 4
- 200 MHz
- Anzahl analoge Eingänge max. 4
- 100 MHz
- Anzahl analoge Eingänge max. 4
- 70 MHz
- Anzahl analoge Eingänge max. 4
- 200 MHz
- Anzahl analoge Eingänge max. 4
- 200 MHz
- Anzahl analoge Eingänge max. 2
- 125 MHz
- Anzahl analoge Eingänge max. 4
- 500 MHz
- Anzahl analoge Eingänge max. 4
- 100 MHz
- Anzahl analoge Eingänge max. 4
- 200 MHz
- Anzahl analoge Eingänge max. 4
- 100 MHz
- Anzahl analoge Eingänge max. 4
- 100 MHz
- Anzahl analoge Eingänge max. 2
- Hand-Oszilloskop für Feldeinsätze mit 2 völlig isolierten Kanälen
- 3 Geräte in einem: Oszilloskop bis 20 MHz, doppeltes Multimeter mit 8000 Digits und doppelter Oberschwingungsanalysator
- Praktisch: Netzunabhängig durch aufladbare Akkus und USB-Ladegerät, freihändige Benutzung durch Umhängetasche oder magnetische Klappstütze
- Zusäzlich mit:
- Robuste Schutztasche CXT293, Vollversion der FlukeView PC-Software (Aktivierungscode) und einen WLAN-Dongle für drahtlose PC-Verbindung mit der FlukeView-2 Software.
- 200 MHz Bandbreite
- 8" (20,3 cm) TFT-Display
- Spectrum Analyzer
- 60 MHz
- Anzahl analoge Eingänge max. 2
- 500 MHz
- Anzahl analoge Eingänge max. 4
- Messung der wichtigsten Parameter des Motorantriebs, einschließlich
- Serielle Bus-Trigger- und Decodieroptionen als Standard - I2C, SPI, UART, CAN, LIN, CAN FD, I2S, MIL-1553B, FlexRay.
- 500 MHz
- Anzahl analoge Eingänge max. 2
- 200 MHz
- Anzahl analoge Eingänge max. 2
- 350 MHz
- Anzahl analoge Eingänge max. 4
- Bandbreite: 200 MHz
- Anzahl analoge Eingänge max. 2
- Samplingrate: 2 GSa/s
- Serielle Bus-Trigger- und Decodieroptionen als Standard - I2C, SPI, UART, CAN, LIN, CAN FD, I2S, MIL-1553B, FlexRay.