Eltako
- Frequency 868 MHz
- Switching capacity 2000 W Incandescent lamps
- Without standby loss
- battery-free radio transmitter
- Without standby loss
- battery-free radio transmitter
Wireless repeater adapter plug 1 and 2 level. 100x55x45mm (dimensions without plug), pure white. Standby loss only 0.7 wat...
Wireless 4-channel button 55x55mm for Busch Reflex and Duro frames. Generates the energy for radio telegrams even at the p...
The wind sensor generates a pulse sequence dependant on the speed of the wind wheel. This is evaluated in a downstream sen...
1 and 2-level radio repeater with small antenna. Stand-by loss only 0.6 Watt. If required, a FA250 radio antenna can be co...
- Minimized standby loss
- Contact circuit with zero crossing
Light-twilight-rain-wind-sensor relay, 4 OptoMOS-semiconductor outputs. Standby loss only 0.05 to 0.5 watts. The sensor re...
Universal dimming switch, Power MOSFET up to 400W. Automatic lamp detection. Bidirectional. Standby loss of only 0.3 watts...
Surge current relay with 2 channels, 1+1 normally open contact potential-free 16A/250V AC, incandescent lamps 2000W, with ...
The light sensor LS modifies a voltage depending on the brightness with the help of a photo resistor. This voltage is eval...
Wireless shutter/blind actuator 1+1 normally open contact 4A/250V AC for a shading element motor. 45x45x18mm. Stand-by los...
Switching actuator shading elements and roller shutters with 2 channels for two 230V motors. 2+2 normally open contacts 4A...
Wireless relay actuator 10A/250V AC, 45x45x18mm. 1 NO or NC contact, non-potential-free. Stand-by loss only 0.8 watts. Wit...
- Without standby loss
- battery-free radio transmitter
Radio 2-way transmitter module. With inner antenna. No standby loss. For panel mounting. 45mm long, 45mm wide, 18mm deep. ...
Radio antenna module for the Eltako RS485 bus with replaceable antenna. With integrated switched-mode power supply 12V DC/...
