Charging systems
- For Sony NP-BX1, NP-FW50, NP-FZ100
- USB output
- Incl. car power adapter
The charger CG 48 from ALPINA is compatible with the batteries BT 2048 Li (order no. S736911) and BT 4048 Li and ensures a...
- For Fuji NP-W126, Panasonic DMW-BLC12, DMW-BLF19, DMW-BLG10
- USB output
- Incl. automotive power adapter
- Compatibility with all 14.4/18 V Li-Ion batteries from Bosch Grün
- Ready to Go in 20 min (battery 2.5 Ah) thanks to 250 % faster charging
- No unnecessary waiting thanks to "Ready to Go" signal
- For 10.8 & 12 V Li-ION B.S. batteries
- Charging period 30 min
- Extended battery life thanks to situation-adapted charging cycles
- Highest level of safety thanks to intelligent charging management
- Permanent battery monitoring for optimum charging process
- Universal charger for Li-Ion/Li-Po battery packs (3.6V/3.7V or 7.2V/7.4V) or 2x 1.2V AA or AAA NiMH batteries
- Multiple fuse protection
- The device automatically detects the battery types used
- The power supply is provided exclusively by the tool battery.
- For NiCd, NiMH, LiPo and Li-ion batteries.
- For up to 2 AAA or AA rechargeable batteries
- USB output
Adaptor Between the adapter for charging devices. Used for charging rechargeable batteries and flat batteries without APT-...
- USB charging socket
- Adjustment wheel for contacts
- Microprocessor-controlled charging technology with automatic charge control
- Universal charger for Li-Ion/Li-Po battery packs (3.6V/3.7V or 7.2V/7.4V) or 2x 1.2V AA or AAA NiMH batteries
- Battery pressure increase protection
- Dynamic charging current adjustment
- Reverse polarity protection
- For FERM CTM1016 Combitool
- For FERM JSM1026 Reciprocating saw
- For FERM OTM1006 Multitool
- Multiple fuse protection
- The device automatically detects the battery types used
- The power supply is provided exclusively by the tool battery.
The 2-compartment charger from makita can 2 rechargeable batteries can be charged at the same time. With USB-connection fo...
- Charge time up to 80 % 35 min at 18 V (6.0 Ah)
- Charge time up to 80 % 35 min at 36 V (4.0 Ah)
60,47 €
available from 07/24/2019
delivery period
(once available)
:
6-8 days
33,37 €
available from 08/07/2019
delivery period
(once available)
:
3-4 weeks
Charger for 9212-3 ∙ 9212 M-1 ∙ 9212 M-1/4 ∙ 9212 SPC-1 ∙ 9212 SPC-1/4 9230-2 ∙ 9230-2/4 ∙ 9233-7 ∙ 9233-7/4 Net weight (k...
205,55 €
available from 07/24/2019
delivery period
(once available)
:
6-8 days
135,50 €
available from 07/24/2019
delivery period
(once available)
:
6-8 days
132,77 €
available from 07/25/2019
delivery period
(once available)
:
6-8 days
49,80 €
available from 07/25/2019
delivery period
(once available)
:
6-8 days
The fastest charger thanks to the 16 amp charging current Personalization, information and service thanks to the connectiv...
The fastest charger thanks to the 16 amp charging current Personalization, information and service thanks to the connectiv...
Charges all DEWALT XR sliding rechargeable batteries with 18 volt as well as DeWALT FLEX VOLT rechargeable batteries (54 o...
Charges all DEWALT XR sliding rechargeable batteries (1.3 - 5.0 Ah) of 10.8 - 18 Volt. DEWALT 2-stage charging process all...
Double quick charger for all DEWALT Li-ion batteries of 10.8, 14.4 and 18 volt XR sliding or from 1.3 to 5.0 Ah as well as...
- Display of charging status indicated by red and green LED
- Suitable for FERM ETM1005 Li-Ion tacker
- USB connector
- charge time 60 minutes
The FERM CDA1097 is an 18V charger for the CDA1096 Li-Ion battery. This charger is part of the FERM CDM1127 impact wrench.
