Workplace equipment
- Suitable for steel pipes DN 20/R3/4" or DN 15/R1/2"
- Outer diameter 26.9 mm or 21.3 mm
- Infinitely-adjustable clamping width
- Small and very handy
- Can be used universally
- Die-cast zinc
- Jaw width 50mm and height 10mm
- Maximum clamping width 34mm
For wood, plastic and sensitive materials.
- Rotates in all directions
- Made of die-cast zinc
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi, etc. and for clamping in profiles as well as work tables
- Rapid – up to 5 times faster than conventional clamps
With this metal clamp, you can set any length you want. All you need is a length of commercially available 3/4" pipe with ...
The matching device holder for the device holder strips (order no.: C02347, C02349 and C02345) for universal expansion.
- Clamping force up to 1,200 N
- Feather light yet ultra strong
- Sturdy fixed and sliding arms made from lightweight magnesium
- Suitable for steel pipes DN 20/R3/4" or DN 15/R1/2"
- Outer diameter 26.9 mm or 21.3 mm
- Infinitely-adjustable clamping width
- Milled steel construction
- Completely angular
- Jaw width 46mm
Made of torsion-resistant IXEF, a high-performance PP. 45 mm low-impact jaws for gentle clamping, with vee grooves for ver...
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi, etc. and for clamping in profiles as well as work tables
- Clamping force up to 1.800 N
- Infinitely adjustable for wall distances of 7 to 35 mm
- Front and lateral support when gluing solid wood floorings
- Pull-down function dependent on the inclined angle of the spindle, with movable mounted pressure plate with protective cap
One-handed-effective - simply ingenious · The low-cost alternative - ideal for all beginners and occasional craftsmen. Eas...
The HEUER-Vise is a real quality tool Made in Germany ". Quite forged steel, guaranteed unbreakable. Because of its high-q...
- With ball joint - can be rotated and swivelled in all direction
- Made of die-cast zinc
- Clamp for quick and secure fastening to workbenches and table tops
- Long, pointed clamping arm for working in tight spaces
- Large width for clamping in borderless areas
- Soft, slip-proof grip pads
- Strong suction cup facilitates instantaneous fixing to any smooth, flat surface
- Ball and socket: rotates in all directions (even downwards)
- Clamping force up to 5,500 N
- Ergonomically shaped wood handle
- With protective caps on the clamping surfaces
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi, etc. and for clamping in profiles as well as work tables
- Clamping force up to 1.800 N
- Jaw span 70 mm
- Table clamp
- Ball joint
- Rotatable and inclinable by the ball join
- Clamping width of clamping jaws: 55 mm
- Upper and lower arms and lever made from high-quality hardwood
- Cork pads for gentle clamping
For the flexible attachment of the screw stick at the work plate, without boring holes - damage-free and fast. The strong ...
- Out drawable as largely as a ball-point pen
- 1.3kg capacity
- Parallel clamping
- diagonal clamping
- Easy to mount
- Clamping force up to 5,500 N
- Ergonomically shaped wood handle
- With protective caps on the clamping surfaces
- 100 mm Clamping range
- spread range of 80 - 180 mm
- clamping force of 250 N (25 kg)
- Bench vice, fastening clamp and device holder, 3-in-1
- Rotates 360° and tilts 50° allowing the user to lock the workpiece in any position
- Clamps to any work surface up to 2-1/2" thick
- Extra slim, attractive design
- Elevation Design Series
- Economic single tissue removal
- Quicklaunch quick adjustment
- Replaceable, reversible jaws 120 mm
- With table clamp
- Suitable for wood, plastic and sensitive materials.
- 47 mm clamping range
- 34 mm projection
For the flexible attachment of the screw stick at the work plate, without boring holes - damage-free and fast. The strong ...
- In the clamped position, the lever is horizontal
- Automatic and infinitely variable adjustment of the clamping height up to 35 mm while clamping force remains unchanged – without having to make manual changes to the position of the pressure screws
- Clamping
- 20 % more clamping force per spindle rotation with optimised rail profile
- Maximum security with linear transfer of force at the sliding arm
- Clamping force up to 6,000 N
