Monitoring relay
Phase control, standby loss only 0.06 watts per path. In-line module with 1 division unit. For optical monitoring of 1 to ...
- Automatic correction of phase sequence in three-phase systems
- Choice of eight or four load feeders per module
- Safely detect overload or short circuit in the 24 V circuit
- Diagnostics via composite signaling contact or single-channel message
- Choice of eight or four load feeders per module
- Safely detect overload or short circuit in the 24 V circuit
- Diagnostics via composite signaling contact or single-channel message
- Choice of eight or four load feeders per module
- Safely detect overload or short circuit in the 24 V circuit
- Diagnostics via composite signaling contact or single-channel message
- Choice of eight or four load feeders per module
- Safely detect overload or short circuit in the 24 V circuit
- Diagnostics via composite signaling contact or single-channel message
Digital monitoring relay for 3-phase voltage with N-conductor Autom. phase sequence correction Phase failure 3 x 90 to 400...
N-Connect male termination Impedance TI795-1N 50 ohm 2.4 and 5 GHz, IP65, 0...6 GHz
Digital monitoring relay Current monitoring, 22.5 mm for IO-Link 0.05...10.0 A AC/DC Overcurrent and undercurrent Transfor...
Motor protection device to protect electrical equipment incorporating PTC thermistor sensors (PTC thermistors) from high t...
Motor protection device to protect electrical equipment incorporating PTC thermistor sensors (PTC thermistors) from high t...
- Ideal for voltage and frequency monitoring
- Plug & Play by preset limit values
- Lead-sealable
Level relay NS 20 for level monitoring of conductive liquids. Use with three electrodes as MIN / MAX control for filling o...
- Effective value measurement
- Monitoring of phase sequence and asymmetry can be activated
- Incremental encoder output and SSI interface for the representation of a position or angular position proportional to the analog signal
- Incremental direction information A/B, depending on the input signal and the programd conversion range; programmable zero pulse (Z/Z)
- Programmable V/f characteristic
- 1 x Sin Cos-Eingang
- 2 x Sin Cos-Ausgang
- 2 x incremental output (TTL/HTL)
375,84 €
available from 03/11/2021
delivery period
(once available)
:
4-6 days
- Universal pulse inputs for all standard incremental encoders and sensors (HTL, RS422 or TTL)
- 2 output relay with potential-free changeover contacts and 2 highly responsive semiconductor outputs
- AC and DC measurement without having to change possible
- Zero point and full scale for further measuring ranges can be scaled in any way by the user.
- Electrical isolation between input, output and control voltage
Load feeder fuseless, Direct-on-line starting 400 V AC, Size S2 22 ... 32 A 230 V AC, 50 Hz screw terminal for installatio...
interface converter Phased-out product !!! For further information, please contact our sales department 24 V AC/DC, 2-way ...