Remote maintenance
- The compact module with many functions
- Global switching, configuration and alarming via SMS
- Includes GSM antenna, temperature sensor and plug-in power supply
- Integrated 3-port switch (3 x Ethernet 100 MBit)
- Secure connection via VPN (OpenVPN)
- Internet connection via network, WAN interface
- High protective class: IP 65
- 3 m connection cable
- Integrated adhesive strips for mounting
- Use the GSM (mobile phone) network to switch and monitor systems remotely
- Incoming call relay activation (free to use)
- Receives SMS message commands and activates/deactivates outputs
- Use the temperature input/output functions on the GX105/6 module
- 96cm connection wire
- The compact module with many functions
- Switching, configuring and alerting globally by SMS
- Built-in LiPo battery
- 2 temperature measurement inputs for monitoring and control
- Graphical Windows ® programming software
- Incl. temperature sensor and plug-in power supply
- DIN rail mount (35 mm)
- Up to 50 phone numbers including category admin
- Timer/counter (for e.g. maintenance cycles)
- 2000VRMS optical isolation
- Provides default/customized web page
- 10/100 Mbps communication rate
- E/A-type: 8DO/DI
- Input voltage: 10 - 50 V/DC
- Open collector 40 V/DC
- Automatic RS-485 data flow control
- 3000 Vdc isolation protection
- Surge protection RS-485 data line
- Data transmission depending on product variant via SMS, e-mail, GPRS (ODP protocol)
- Event controlled or continuous communication
- Ex approval
- 2 x 10/100 Mbps Ethernet ports for LAN redundancy
- COM port redirection (Virtual COM), TCP and UDP operation modes
- Up to 921.6 kbps, and any baud rate setting
- Integrated 4-port switch (4 x Ethernet 100 MBit)
- Internet connection via network, WAN interface
- 1 x MPI/PROFIBUS up to 12 Mbit/s, 1 x RS-232/485 switchable
- Up to four CAN channels
- 32-bit micro-controller
- Programming interface for Windows and Linux
GSM UMTS antenna, with omnidirectional characteristic, 2 m antenna cable with SMA round connector
Communication modules as an interface for connecting to a higher-level controller. Compatible with EB-08, EB-18 and EB-38 ...
Communication modules as an interface for connecting to a higher-level controller. Compatible with EB-08, EB-18 and EB-38 ...
The CAN repeater is for galvanic isolation of two segments of a CAN network and for setting up star or tree topologies. As...
ISO 11898-2 CAN repeater with series connection capability The CAN-CR 200 is used for galvanic isolation of two segments ...
Of ISO 11898-2 on Fiber Optic Converter with series connection capability The CAN-CR210/FO is the implementation of the C...
The CAN@net II allows for simple and flexible access of a PC on CAN-systems via Ethernet. Through the support of the TCP/I...
CAN-Ethernet gateway In the Gateway mode is the CAN@net II/Generic via TCP/IP with a PC or a controller platform. The appl...
The CANio 500 enables fast and simple connection of various analog and digital signals to a CAN or CA Nopen-Netzwerk - whe...
The CANio 500 enables fast and simple connection of various analog and digital signals to a CAN or CA Nopen-Netzwerk - whe...
The CAN bridge allows the coupling of two CAN networks with different bit rates. In contrast to a CAN-Repeater, only the ...
Low-priced CAN interface family for the USB-Port The IXXAT USB-to-CAN V2 is the successor generation of the popular IXXAT...
Low-cost CAN interface family for the USB port The IXXAT USB-to-CAN V2 is the successor generation of the proven IXXAT US...
Low-priced CAN interface family for the USB-Port The IXXAT USB-to-CAN V2 is the successor generation of the popular IXXAT...
120 Ohm for high-speed systems according to ISO 11898-2; socket; RT CAN between pin 2 and 7.
120 Ohm for high-speed CAN-systems according to ISO 11898-2; plug; RT between pin 2 and 7.
120 Ohm for high-speed CAN-systems according to ISO 11898-2; Sub-D9 connector plug to socket; pin assignment 1-to-1, RT be...
Antenna base with a strong magnet for mounting, 1.5 m antenna cable and rpsma plug.
Cable set: 1.8 m M12 RJ45 Ethernet cable, M12 plug-in power supply unit.
- Transparent data exchange between a Modbus TCP client (master) and Modbus RTU slaves
- Assumes the role of a server (slave) on the Modbus TCP side
- Supports 10/100 Mbit Ethernet (Modbus TCP)
- Generates a virtual serial COM port in the PC
- Driver for all Windows versions including
- 24-Volt supply, DIN rail mounting
- Powerful ARM Cortex processor for fast data cycles
- Increased memory support with up to 512 MB Flash and 1024 MB RAM
- Ideal for global use by supporting 5 different 3G frequency bands
- Powerful ARM Cortex processor for fast data cycles
- Increased memory support with up to 512 MB Flash and 1024 MB RAM
- Two separate Ethernet interfaces (WAN and LAN) enable secure communication with your field equipment.
- Connection of up to 16 CA Nopen-Slave-node in master mode
- 256 bytes of input and 256 bytes of output data per module
- Connection of up to 3 modules per CPU
The Profibus master simulator is a simple test tool for commissioning and testing Profibus devices. The user-friendly PC p...
- Integrated 4-port switch (4 x Ethernet 100 MBit)
- Secure connection via VPN (PPTP, IPSec, L2TP, OpenVPN)
- Internet connection via network, WAN interface
- Integrated 4-port switch (4 x Ethernet 100 MBit)
- Secure connection via VPN (PPTP, IPSec, L2TP, OpenVPN)
- Internet connection via network, WAN interface or WLAN modem
- Integrated 4-port switch (4 x Ethernet 100 MBit)
- Secure connection via VPN (PPTP, IPSec, L2TP, OpenVPN)
- Internet connection via network, WAN interface or UMTS modem